Sirona DAC UNIVERSAL - Page 93

60 53 362 D3472
D3472.201.10.20.02 07.2016
93
Sirona Dental A/S 5Operation DAC UNIVERSAL ADVANCED
Operating Instructions DAC UNIVERSAL 5.2Using the menu and display information DAC UNIVERSAL ADVANCED
båÖäáëÜ
5.2.2.3.4 History
The History section persists of 3 subcategories:
● Cycles:
Shows the number of cycles completed for each of the 3 programs.
● Service:
Displays the remaining cycles until the next service or the date (dd/
mm/yyyy) on which a service must be completed.
● Errorbuffer:
The errorbuffer collects and stores the last 18 errors the device has
encountered. This list is viewable with 3 listed errors at a time.
Each error is displayed with a sequence number then the error code
and the date it was encountered. Example:
The lower the sequence number, the newer the error is.
An error marked with the sequence number 1, is the newest error. While
an error marked with sequence number 18 is the oldest. The oldest error
will then be deleted from the errorbuffer whenever a new error is
detected.
5.2.2.3.5 Info
Enter this section to view the serial number and software version of the
DAC UNIVERSAL.