SMC Networks HRL100-A 40 Series - Page 35

HRX-OM-X037
Chapter 3 Transport and Setting Up
HRL Series 3.3 Installation
3-15

Preparation for operation
1. Remove four screws to remove the front panel for the electrical unit.
Fig. 3-6 Remove the front panel for the electrical unit (For air-cooled type)
Fig. 3-7 Remove the front panel for the electrical unit (For water-cooled type)
OFF
Note: Turn off the earth leakage breaker.
The front panel of the electrical unit
cannot be removed without turning off
the breaker.
Screw
Front panel for the
electrical unit
OFF
Note: Turn off the earth leakage breaker.
The front panel of the electrical unit
cannot be removed without turning off the breaker.