54
Section 7 Quick Lookups
Quick Lookups provides access to vehicle manufacturer:
•Engine Oil Specifications and Reset Information
•Tire and Wheel Service Information and Reset Information
Wi-Fi Required
Wi-Fi connection is required to use this application. See Wi-Fi Connection
/ Troubleshooting on page 127.
Quick Links
• Oil Specs and Resets page 54
• Tire and Wheel Service page 57
7.1 Oil Specs and Resets
Home Screen: Quick Lookups > Oil Specs and Resets
The Oil Specs and Resets information service provides up-to-date OEM information
on your diagnostic tool. Quick Lookups provides both OEM information and
Scanner functions in one place.
Typical OEM information provided:
• Oil capacity and specifications
• Oil Service reset procedures and information
• Scanner Functional Resets
— Oil Specs and Resets vehicle coverage is the same as the Scanner vehicle
coverage.
— Not all vehicles may have on-board diagnostic tool reset capabilities, or
have information available.
— To use the Oil Specs and Resets feature you must have authorized access,
contact your sales representative for details.
— The diagnostic tool is equipped with the ability to connect to a Wi-Fi
network, however the connection is solely dedicated to our Snap-on
Information Service Network. Before you begin using an integrated
Information Service you must connect to a wireless network. See Wi-Fi
Connection / Troubleshooting on page 127 for instructions.
— If you experience a wireless network connection loss, Oil Specs and
Resets information will not refresh and/or may cause the function to stop. To
continue use, you must re-establish your Internet connection.
— Performance may vary depending on your wireless network equipment and
ISP.
To Next Page
Loading...
Need help?
General
