Appendix (Volume 3)
1146
Error Messages
Install An error occurred during the
install process.
For more details, see
Page 9900.
7316.10: Engineering Setup >System >Install/
Unit Config >Install
In the above menu, the menu software
installation package does not match the model
on which it is to be installed.
Not Found.
The software package does not
exist on the removable disk.
7316.10: Engineering Setup >System >Install/
Unit Config >Install
In the above menu, the software package to be
installed was not found. Check that the memory
card is correctly inserted, and try the installation
once more.
Install All processes have succeeded. 7316.10: Engineering Setup >System >Install/
Unit Config >Install
In the above menu, the installation procedure
completed successfully.
Internal
Error:
Data HDD
The user data partition of hard
disk drive is damaged, and all
data is lost. The hard disk drive
needs to be reformatted.
Please execute HDD format on
Page 7317.
When starting up the menu system, an error
was found on the hard disk.
In Menu 7317: Engineering Setup >System
>Maintenance, execute [HDD Format].
Internal
Error:
HDD is
incorrect
Hard disk is incorrect or not
formatted.
To format the hard disk, please
execute “HDD Format” on
Page 7317.
Internal
Error:
Temporary
HDD
The system data partition of
hard disk drive is damaged.
The hard disk drive needs to be
reformatted. Please execute
HDD format on Page 7317.
Please make sure to save all
data in the user data partition
of hard disk drive to any other
device or media, before
reformatted.
When starting up the menu system, an error
was found on the hard disk.
In Menu 7317: Engineering Setup >System
>Maintenance, execute [HDD Format].
Invalid
Name
Empty... 2512: Frame Memory >Still >Freeze/Store
In the above menu, a Store was carried out
without specifying a name.
Alternatively:
71XX: File Menu
7171: File >Configure >Directory
In the above menu, when renaming a file or
creating a directory, the name was not entered.
Enter the name correctly.
The file exists already... 2512: Frame Memory >Still >Freeze/Store
In the above menu, the file name specified for a
store operation already exists in the switcher.
Specify a different name.
Icon Title Message Description
To Next Page
Loading...
