Chapter 17 Files
864
Importing and Exporting Files
2
Press one of the buttons at the top left to select the type of data to display.
• To display still image files, press [Still].
• To display clip files, press [Clip].
• To display extended clip files, press [Ext Clip]
All of the selected type of frame memory data appears in the list on the left.
3
In the folder selection area on the left, select the frame memory folder to
which you want to import the file.
4
Press the device selection area on the right to select [Memory Card].
5
Select the directory to hold the imported files.
Notes
Files on a memory card to be imported must always be in a directory
immediately below root.
6
Using any of the following methods, select the file you want to import.
• Press directly on the list in the status area.
• Press the arrow keys to scroll the reverse video cursor.
• Turn the knob.
7
Press [T Import].
This transfers the external file to the frame memory register.
Exporting Frame Memory Data
As an example, to save image data from frame memory in a bitmap format on
a memory card, use the following procedure.
1
In the Import/Export menu, press the file format selection area at the top
of the screen to select [Frame Memory (.BMP)].
Files of the selected type are shown in the list on the right.
2
Press one of the buttons at the top left to select the type of data to display.
• To display still image files, press [Still].
• To display clip files, press [Clip].
Knob Parameter Adjustment Setting values
4 List R File selection 1 and upwards
To Next Page
Loading...
