Sony MVS-8000X System User Manual

Chapter 16 Macros
800
Macro Operations in the Numeric Keypad Control Block and the Keyframe Control Block
Saving a Macro
Use the following procedure to save the register after creating or editing/
modifying a macro.
1 In the numeric keypad control block, press the [MCRO] button, turning it
on.
This assigns the numeric keypad control block to macro operations.
2 Press the [STORE] button, turning it on.
3 Enter the number of the register in which you want to save the macro with
the numeric keypad buttons. (1 to 250)
To search for an empty register, instead of entering a number, press the [.]
(period) button.
The display shows the corresponding register number. A letter “E” after
the number indicates that the corresponding register is empty.
4 Press the [ENTER] button.
This saves the macro data in the specified register, and the [STORE] button
goes off.
The [RCALL] and [STORE STATS] buttons light.
To cancel the saving of a macro
To cancel the saving of a macro immediately after performing it, hold down the
[STORE STATS] button and press the [UNDO] button.

Sony MVS-8000X System Specifications

General

Category	Video Production Switcher
Audio Inputs	Embedded audio support; Optional audio interface boards available
Audio Outputs	Embedded audio support; Optional audio interface boards available
Frame Rate Support	59.94i/50i, 23.98P, 24P, 25P, 29.97P
Video Format Support	1080i, 720p, 480i, 576i
Transition Effects	Mix, Wipe
Control Interface	Touchscreen
Compatibility	Compatible with various Sony equipment
Power Supply	100-240V AC, 50/60Hz