Sony MVS-8000X System - Posterization and Solarization Settings; Nega Settings

Chapter 11 DME Operations
540
DME Special Effect Operations
Posterization and Solarization Settings
You can specify the degree of luminance coarsening.
You can specify the degree of chroma coarsening.
Applying the Posterization or Solarization effect
1 In the DME menu, select VF2 ‘Video Modify’ and HF3 ‘Color Modify.’
The Color Modify menu appears.
2 Press [Poster/Solar], turning it on.
The Posterization and Solarization effects are enabled. You can adjust the
coarseness of the gradations with the knobs.
3 Set the parameters.
Masking the Posterization or Solarization effect with a selected
pattern
Press [Mask] to display the Mask menu, and set the pattern type and modifiers.
For details, see “Mask Settings” (page 548).
Nega Settings
Applying the Nega effect
1 In the DME menu, select VF2 ‘Video Modify’ and HF3 ‘Color Modify.’
The Color Modify menu appears.
2 Press [Nega Y] or [Nega C], turning it on, or press both buttons, turning
them on.
Knob Parameter Adjustment Setting values
1 Poster Coarseness of luminance
gradations (Posterization
parameter)
0.00 to 100.00
2 Solar Coarseness of chroma
gradations (Solarization
parameter)
0.00 to 100.00