Sony MVS-8000X System - Making a Setting for Linking Two M;E Banks

Chapter 20 Switcher Setup (Switcher)
1056
Settings Relating to Function Links (Link Menu)
Making a Setting for Linking Two M/E Banks
You can link any two M/E banks for some operations by using the Switcher
>Link >M/E Link menu.
The operations for which you can link two M/E banks are as follows.
• Transition execution (auto transition, cut, and fader lever operation)
• Next transition selection
• Transition type selection
1 In the Switcher >Link menu, press [M/E Link].
The M/E Link menu appears.
The status area displays a link list showing link source banks (M/E and
PGM/PST) and link destination banks, and a selection list.
2 Using any of the following methods, select the link number you want to
set.
• Press directly on the list in the status area.
• Press the arrow keys to scroll the reverse video cursor.
• Turn the knob.
3 In the <M/E Select> group, select [Master M/E] (link source).
4 Using any of the following methods, select the M/E or PGM/PST bank you
want to be the link source, then press [M/E Set].
• Press directly on the list in the status area.
• Press the arrow keys to scroll the reverse video cursor.
• Turn the knob.
a) 1: M/E-1
2: M/E-2
3: M/E-3
4: M/E-4
5: PGM/PST
5 In the <M/E Select> group, select [Linked M/E] (link destination).
6 In the same way as in step 4, select the M/E or PGM/PST bank you want
to be the link destination, then press [M/E Set].
Knob Parameter Adjustment Setting values
1 Link No Link number selection 1 to 8
Knob Parameter Adjustment Setting values
2 No Bank selection
1 to 5
a)