Sony MVS-8000X System - Effect Status Display; Effect Register Editing

Chapter 13 Keyframe Effects
739
Register Operations in the Menus
• Press the arrow keys to scroll the reverse video cursor.
• Turn the knobs.
• To select all registers, press [ALL].
5 Press [Effect Dissolve], turning it on.
6 Turn the knob to set the duration.
Setting the duration for a temporary attribute
To set the duration for a temporary attribute set in the numeric keypad control
block, turn knob 5.
Effect Status Display
The Effect >Effect 1-99 menu displays the following information.
Region name: The selected region name appears in the upper part of the list.
Register number
Register name
Write-protected status: When the register is write-protected, a letter “L”
appears.
Empty status: When the register is empty, a letter “E” appears.
Effect Register Editing
You can carry out the following editing on effect registers and master timeline
registers.
• Lock: Write-protect the contents of the register.
• Copy: Copy the contents of one register to another register.
Knob Parameter Adjustment Setting values
1 Register Register number 1 to 99
3 Num Select number of registers 1 to 99
Knob Parameter Adjustment Setting values
4 Eff Diss
Duration
Dissolve duration 1 to 999 (frames)
Knob Parameter Adjustment Setting values
5 Temp Dur Temporary attribute
dissolve duration
0 to 999 (frames)