Chapter 2 Menus and Control Panel
79
Names and Functions of Parts of the Control Panel
Downstream Key Control Block (MKS-8032 DSK Fader
Module, Option)
a Key delegation buttons
Press one of the [DSK1] to [DSK4] buttons
to delegate this control block to the
corresponding keyer.
When the MKS-9012 2M/E Control Panel
is used, using the Setup menu, it is possible
to assign these to DSK5 to DSK8 or M/E
keys 1 to 8.
b Independent key transition type
selection buttons
Press one of these buttons, turning it on, to
select the downstream key transition type.
MIX: Carry out a dissolve with the key
selected with the key delegation
buttons.
WIPE: Carry out a wipe with the key
selected with the key delegation
buttons.
DME: This switches the key selected with
the key delegation buttons, using a
DME wipe.
CUT: Instantaneously insert or delete the
key selected with the key delegation
buttons.
SHIFT: When setting is made in the Setup
menu to allow a different transition
type for inserting or deleting a key, it is
possible to display and set the
transition after the next transition while
this button is held down.
1 Key delegation buttons
5 Key source name display/key snapshot
buttons
4 Key snapshot setting
buttons
3 Independent key transition execution section
2 Independent key transition type
selection buttons
To Next Page
Loading...
