Sony MVS-8000X System - Recalling a Macro Register and Executing a Macro

Chapter 16 Macros
792
Macro Operations in the Numeric Keypad Control Block and the Keyframe Control Block
Recalling a Macro Register and Executing a Macro
To carry out a macro operation, recall a macro register. Recalling an empty
register allows you to carry out macro editing operations. Recalling a register
holding a macro executes the macro immediately.
To recall a macro register, use the following procedure.
1 In the numeric keypad control block, press the [MCRO] button, turning it
on.
This assigns the numeric keypad control block to macro operations, and
the [RCALL] button lights.
2 Enter the number of the register to be recalled with the numeric keypad
buttons. (1 to 250)
To search for an empty register, instead of entering a number, press the [.]
(period) button.
The display shows the corresponding register number. A letter “E” after
the number indicates that the corresponding register is empty.
Edit point specification buttons
EDIT ENBL button
Editing buttons
PAUSE button