Chapter 15 Utility/Shotbox
777
Shotbox Execution
Shotbox Execution
You can recall (and run) shotbox registers from the following control blocks.
This section describes the various methods of operation.
• Numeric keypad control block (see page 777)
• Utility/shotbox control block
Shotbox Execution From the Numeric Keypad Control
Block
Numeric keypad control block
1
In the numeric keypad control block, press the [SHOTBOX] button,
turning it on.
• This allocates the numeric keypad control block to shotbox operations.
Region selection buttons
STORE button
STORE STATS button
RCALL button
SHOTBOX button
Display
UNDO button
Numeric keypad
To Next Page
Loading...
