Chapter 8 Color Backgrounds, Copy and Swap, and Other Settings
352
Copy and Swap
Copy and Swap
You can copy or swap the settings among the switcher banks or between
keyers.
The following settings can be copied or swapped.
• Overall settings for the M/E-1 to M/E-4, and PGM/PST banks
• Keyer settings
• Wipe settings in a transition control block
• Wipe settings in an independent key transition control block
• DME wipe settings in a transition control block
• DME wipe settings in an independent key transition control block
• Matte data (color 1, color 2, and how to compose them)
• Color settings
• DME channel settings
• Format converter input settings (copy only)
• Format converter output settings (copy only)
You can carry out copy operations with a simple button operation. Swap
operations, and copy operations on DME data can only be done with a menu
operation.
M/E copy and M/E swap
You can copy and swap the overall bank settings between the M/E-1 and PGM/
PST banks.
Notes
If a DME is being used on the source M/E bank, then if for example there are
insufficient DME channels, it may not be possible to select the DME.
There are no such restrictions on a swap.
Keyer copy and keyer swap
You can carry out copy and swap operations among the keyers listed in the
following table.
Target bank Target data
M/E-1
PGM/PST
Bank settings excluding the following data items:
• Setup data
• Snapshots
• Keyframe effects
• Key snapshots
•Key memory
To Next Page
Loading...
