Chapter 19 Control Panel Setup (Panel)
988
Setting Button Assignments (Prefs/Utility Menu)
Assigning a menu shortcut to a user preference button
1
Referring to the procedure up to step 2 of “Assigning Functions to User
Preference Buttons” (page 983), select [Menu Shortcut].
The user preference buttons [PREFS 1] to [PREFS 16] flash amber.
2
Using any of the following methods, display the menu to which you want
to make a shortcut.
• In the menu control block, press the relevant top menu selection button,
then select VF and HF.
• Press the menu page number button in the upper left corner of the menu
screen, then enter a menu number from the numeric keypad window.
• Press a particular control panel button twice in rapid succession.
3
Press the user preference button to which you want to assign the shortcut.
The menu screen goes back to the Prefs/Utility menu, and the selection is
reflected in the status area. The user preference buttons [PREFS 1] to
[PREFS 16] flash amber.
4
Repeat steps 2 and 3 as required, to assign all desired menu shortcuts to
the user preference buttons.
To abandon the process of menu shortcut assignment
In the Prefs/Utility menu, press [Menu Shortcut] once more.
This exits the menu shortcut assignment mode.
Assigning a Function to a Memory Recall Button in the
Utility/Shotbox Control Block (MKS-8033 Utility/
Shotbox Module, Option)
1
In the Prefs/Utility menu, press [Utility Module Assign].
The Prefs/Utility >Utility Module Assign menu appears. The status area
shows the settings in the utility/shotbox control block.
2
Using any of the following methods, select the button to be assigned.
• Press directly on the list.
• Press the arrow keys to scroll the reverse video cursor.
• Turn the knobs.
To Next Page
Loading...
