Chapter 19 Control Panel Setup (Panel)
958
Overall Control Panel Settings (Config Menu)
3
Press one of [1st], [2nd], [3rd], and [4th], to select the key control block.
4
Press [Button Assign].
The assignment status of the control block you selected in step 3 above
appears.
5
Press the button to which you want to assign a function, displaying it in
reverse video.
6
Using any of the following methods, select the function you want to assign
from the Button Assign list.
• Press directly on the list.
• Press the arrow keys to scroll the reverse video cursor.
• Turn the knob.
7
When you have completed the required assignments, press [Set].
Assigning Preview Output to Preview Selection Buttons
It is possible to assign any preview output to a preview selection button.
Knob Parameter Adjustment Setting values
1 Button Assign Select function to be
assigned to button
1 to maximum value
To Next Page
Loading...
