Chapter 16 Macros
801
Macro Editing Using Menus
Macro Editing Using Menus
Using any of the menus in the following table, you can edit macro registers and
macro events.
Macro Register Editing
You can display the current state of a macro register using the Macro >Register
menu.
The items displayed are the same as under “Effect Status Display” (see page
739), with the exception that the region name is not displayed and that the total
number of macro events saved in the register is displayed.
In the Macro >Register menu, you can do the following editing operations on
macro registers.
• Lock: Write-protect the contents of the register.
• Copy: Copy the contents of one register to another register.
• Delete: Delete the contents of a register.
• Name: Attach a name to a register.
The operations for macro register editing are the same as those for effect
register editing (see page 739) except the region selection operation, which is
not necessary for macro register editing.
Online Editing of Macro Events
Using the On Line Edit menu, you carry out online editing of macro events.
Menu Function Operations
Register menu (macro
register editing)
Carry out macro register editing. • Locking a register
• Copying a register
• Deleting a register
• Naming a register
On Line Edit menu
(online editing of
macro events)
Edit events in a macro register, using
the control panel and menus.
• Inserting an event
• Deleting an event
• Modifying an event
Off Line Edit menu
(offline editing of
macro events)
Edit events in a macro register, on
the hard disk, or on a memory card,
using the menus.
• Inserting an event
• Adding an event
• Deleting an event
• Creating a new
macro
To Next Page
Loading...
