Chapter 11 DME Operations
591
DME Special Effect Operations
Trail Settings
Notes
• Of the three effects of trail, motion decay and keyframe strobe, only one can
be on at a time. When one of them is on, turning another of them on
automatically turns off the one that has been on.
• Turning Trail on when Motion Decay (see page 595), Keyframe Strobe (see
page 597) or Wind (see page 599) is on turns it off automatically.
Applying the Trail effect
1
In the DME menu, select VF5 ‘Light/Trail’ and HF2 ‘Trail.’
The Trail menu appears.
2
Press [Trail], turning it on.
With no selection made in
the <Bar Light Mode>
group
Width
Bar Light
With a selection made in
the <Bar Light Mode>
group
Diffuse Light
Diffuse Light
Bar Light
Offset = 0
To Next Page
Loading...
