Chapter 11 DME Operations
570
DME Special Effect Operations
Mirror settings
You can choose to reflect in the directions left to right, right to left, bottom to
top, top to bottom, or any combination of directions. You can also set the
position of the border between original and reflections.
To apply the Mirror effect
With the Mirror menu displayed, press [Left to Right], [Right to Left], [Top to
Bottom], or [Bottom to Top] to set the reflection method (multiple selections
possible).
Left to Right: Reflect left side on right.
Right to Left: Reflect right side on left.
Top to Bottom: Reflect top side on bottom.
Bottom to Top: Reflect bottom side on top.
To set the position of the border between original and reflection
1
Press [Position].
2
Set the following parameters.
a) Setting for SD 4:3, SD 16:9
b) Setting for HD 4:3, HD 16:9
Multi Mirror settings
You can set the width of the original, the center position of the original, the
offset of the image with fixed mirrors, the direction of the mirrors, and other
parameters.
Left to Right
Top to
Bottom
Knob Parameter Adjustment Setting values
1 H Horizontal border position
–8.000 to +8.000
a)
–32.000 to +32.000
b)
2 V Vertical border position
–6.000 to +6.000
a)
–24.000 to +24.000
b)
To Next Page
Loading...
