Sony MVS-8000X System - Page 569

Chapter 11 DME Operations
569
DME Special Effect Operations
To apply the Split Slide effect
With the Split Slide menu displayed, set the following parameters.
To set the partition position
1 Press [Position], turning it on.
2 Set the following parameters.
a) Setting for SD 4:3, SD 16:9
b) Setting for HD 4:3, HD 16:9
Parameter group [1/2]
Knob Parameter Adjustment Setting values
1 Transition H Degree of transition in horizontal
direction
–100.00 to +100.000
2 Random H Degree of randomness in distance
moved by blocks in horizontal
direction
0.00 to 100.00
3 Skew H Degree of skew in horizontal
direction
0.00 to 100.00
4 Width H Horizontal width of partition 0.00 to 100.00
5 Angle Angle of partition line –8.000 to +8.000
Parameter group [2/2]
Knob Parameter Adjustment Setting values
1 Transition V Degree of transition in vertical
direction
–100.00 to +100.000
2 Random V Degree of randomness in distance
moved by blocks in vertical
direction
0.00 to 100.00
3 Skew V Degree of skew in vertical direction 0.00 to 100.00
4 Width V Vertical width of partition 0.00 to 100.00
5 Angle Angle of partition line –8.000 to +8.000
Knob Parameter Adjustment Setting values
1 H Horizontal partition position
–5.000 to +5.000
a)
–20.000 to +20.000
b)
2 V Vertical partition position
–5.000 to +5.000
a)
–20.000 to +20.000
b)