Chapter 13 Keyframe Effects
690
Keyframes
Paths
The term “path” refers to the specification of how interpolation is carried out
from one keyframe to the next.
Images are interpolated from an edit point to the next one according to the path
setting.
For details of the path setting procedure, see “Path Setting” (page 725).
Switcher path settings
Carry out path settings in the Key Frame menu.
For each menu, the following settings are available.
M/E-1 and P/P menus
Item Paths that can be set
M/E1, P/P All For each M/E and PGM/PST, path settings for
the following items are made simultaneously.
Key1 to Key8 Overall path settings for items relating to keys
1 to 8 are made simultaneously.
Key 1 All to Key 8 All
Source Key source path for keys 1 to 8
Fill Key fill path for keys 1 to 8
Proc Proc path for keys 1 to 8
Trans Transition path for keys 1 to 8
Bkgd/Util Overall path settings for items relating to
backgrounds and utility buses are made
simultaneously.
Bkgd/Util All
Bkgd A Path for background A
Bkgd B Path for background B
Util 1 Path for utility 1
Util 2 Path for utility 2
DME 2nd Video Path for video to be used for second DME
channel
Wipe/DME Wipe Overall path settings for items relating to wipes
and DME wipes are made simultaneously.
Wipe/DME
Wipe All
Wipe Path for wipes
DME Wipe Path for DME wipes
Trans – Transition path for each M/E and P/P bank
To Next Page
Loading...
