Sony MVS-8000X System - Crop Settings

Chapter 11 DME Operations
509
DME Special Effect Operations
If Mix Color or Ext Video selected, the border color changes according to the
mix color signal or external video signal.
Softening the border edges
Press [Border Soft], turning it on, and set the following parameters.
Crop Settings
Cropping the image
1 In the DME menu, select VF1 ‘Edge’ and HF1 ‘Border/Crop.’
The Border/Crop menu appears.
2 Press [Crop], turning it on.
The Crop effect is enabled. You can adjust degree of cropping with the
knobs.
3 Set the parameters.
The valid ranges of the parameter values depend on the combination of
signal format (SD/HD) and aspect ratio (4:3/16:9) selected in the system,
as follows.
•4:3 mode
Knob Parameter Adjustment Setting values
1 Luminance Luminance 0.00 to 100.00
2 Saturation Saturation 0.00 to 100.00
3 Hue Hue 359.99 to 0.00
Knob Parameter Adjustment Setting values
1 Soft Softness of inner side of border 0.00 to 100.00
Parameter group [1/2]
Knob Parameter Adjustment Setting values
1 H Crop positions on left and right
sides
Left value shown
2 V Crop positions on top and
bottom sides
Top value shown
3 All Crop positions on all sides Left value shown