Chapter 4 Keys
162
Overview
However, in the case of a chroma key, it excludes color cancel, Y balance,
foreground CCR, window, and shadow.)
Full mode: All settings except transition (the same parameters as simple mode,
Fine Key, key modifiers, main and sub mask settings, chroma key detailed
settings, and so on)
For the settings for these modes, see “Settings Relating to Keys, Wipes, Frame
Memory and Color Correction (Key/Wipe/FM/CCR Menu)” in Chapter 20
(Volume 3).
Key Default
With a simple operation you can return the key adjustment values to their
defaults.
The adjustment values which can be returned to their default values are as
follows.
• Adjustment values for the particular key type (Clip, Gain, Density, Filter,
etc.)
In the case of chroma keying, all adjustment values return to their default
values.
• Key position
• Key inversion
• Clean mode
For details, see “Returning the key adjustment values to their defaults” (page
208).
For the menu operation to return the key adjustment values to their defaults,
see “Returning to default state in function groupings” (page 91).
To Next Page
Loading...
