Sony MVS-8000X System - Displaying a Menu

Chapter 2 Menus and Control Panel
87
Basic Menu Operations
a) When the three-dimensional transformation operation mode is enabled.
b) When the [MENU] button is Off.
c) When the [MENU] button is On.
d) When the resizer control mode is enabled.
a) When the [TIMELINE] button is Off.
b) When the [TIMELINE] button is On.
Displaying a Menu
To display, for example, the M/E-1 >Key1
>Type menu, use either of the following
operations.
• Press the top menu selection button [M/E
1], then press the VF1 ‘Key1’ button and
the HF1 ‘Type’ button in that order.
• Press the menu page number button in the
upper left corner of the menu screen to
display the top menu window, then enter
the page number of the M/E-1 >Key1
>Type menu, which is 1111, and press
the [Enter] button. (For details of the
menu page numbers, see “Menu Tree”
(page 434).)
The M/E-1 >Key1 >Type menu appears in
the menu display as follows.
Device control block (trackball)
Buttons Menus See
DME1 to DME8
a)
DME >XX Chapter 11
(Volume 2)
DEV1 to DEV12 assigned
buttons
• Device >DDR/VTR >Cueup & Play
b)
• Device >DDR/VTR >Timeline
c)
Chapter 12
(Volume 2)
FM1CLIP to FM8CLIP
assigned buttons
Frame Memory >Clip >Recall –
K1RSZ to K8RSZ
d)
• M/E-1, 2, 3, 4 >Key1, 2, 3, 4, 5, 6, 7, 8
>Processed Key
• PGM/PST >DSK1, 2, 3, 4, 5, 6, 7, 8 >Processed
Key
page 210
Device control block (search dial)
Buttons Menus See
DEV1 to DEV12 • Device >DDR/VTR >Cueup & Play
a)
• Device >DDR/VTR >Timeline
b)
Chapter 12
(Volume 2)
FM1CLIP to FM8CLIP
assigned buttons
Frame Memory >Clip >Recall –