Chapter 1 MVS-8000X Functions
35
Basic Video Processing
Masks
A mask allows a part of the image to be replaced by the background or a key.
To prevent unwanted holes in the background, or if a key is not the desired
shape, you can correct this with a mask.
Resizer
This function allows you to apply effects, similar to a DME, such as zoom,
movement, or aspect ratio change to a part of a created key. You can use the
following operations.
• Two-dimensional transform of a key
• Resizer interpolation settings
• Resizer crop/border settings
• Resizer effect settings (wide key border, drop shadow, edge enhancement,
mosaic, defocus, mask)
For details, see Chapter 4 “Keys” (page 155).
Wipes
A wipe is a transition from the current video stream to a new video stream,
using a wipe pattern.
Changing the background by means of a wipe is referred to as a “background
wipe,” and inserting or deleting a key with a wipe is termed a “key wipe.”
There are two types of wipe: those that can be selected in a common transition,
and those that can be selected in an independent key transition.
The patterns that can be used for a wipe are as follows.
• Standard wipe patterns
• Enhanced wipes
• Rotary wipes
• Mosaic wipe pattern
• Random and diamond dust wipe patterns
You can combine two selected patterns (referred to as “main” and “sub”) to
create a new pattern (pattern mix).
You can also specify the wipe direction, or set the pattern position, applying
various changes and modifiers to the selected wipe pattern.
For details, see Chapter 5 “Wipes” (page 227).
To Next Page
Loading...
