Chapter 19 Control Panel Setup (Panel)
987
Setting Button Assignments (Prefs/Utility Menu)
a) For the safe title on/off commands (from ME1 PGM1 ST-ME1 PGM4 ST to AUX1 ST-AUX48
ST), the name of the assigned output signal is shown.
b) Pressing this button to turn it on enables key snapshot operations for all control blocks.
DCU GPI1 Test Fire
|
DCU GPI50 Test Fire
Output test trigger from port assigned
to DCU GPI1
|
Output test trigger from port assigned
to DCU GPI50
Output (lights
only at the instant
the button is
pressed)
When the output
is assigned
Macro Attachment
Enbl
Enable/disable macro attachment Enabled Disabled
Macro Only Set Macro only mode on/off On Off
Pre Macro Set macro attachment in pre macro
mode
Can be set only
while pressed (lit)
When the function
is assigned
Post Macro Set macro attachment in post macro
mode
Can be set only
while pressed (lit)
When the function
is assigned
Macro Take Macro execution During execution When the function
is assigned
Macro Auto Ins Macro auto insert mode on/off On Off
Macro AT with Rate When registering an auto transition
macro event, on/off setting of mode to
save transition rate
On Off
Macro AT with A/B Bus When registering an auto transition
macro event for the transition control
block, on/off setting of mode to save A/
B Bus cross-point settings
On Off
Macro TL with Region When registering a timeline macro
event, on/off setting of mode to save
applicable region
On Off
DME Override DME override on/off On Off
DME Graphic DME graphics on/off (Applies to
graphics for channel selected in device
control block)
On Off
System Manager Enbl Enable/disable operation from System
Manager
Enabled Disabled
Plug-In Editor Enbl Enable/disable operation from an
editing keyboard
Enabled Disabled
Inhibit Set Inhibit cross-point button Can be set only
while pressed (lit)
When the function
is assigned
Inhibit All Clear Clear all cross-point button inhibit
settings
Can be set only
while pressed (lit)
When the function
is assigned
K-SS Store
Enable/disable key snapshot saving
b)
Enabled Disabled
Command name
a)
Function Button status
Lit amber Off
To Next Page
Loading...
