21
Table of Contents
Settings for the Wipe Snapshot Menu...............................................1007
Setting the Button Operation Mode...................................................1008
Setting the Operation Mode of the [ALL] Button in the Transition
Control Block.........................................................................1010
Setting Trackball, Joystick, Search Dial, and Double-Click Sensitivity
................................................................................................1010
Specifying Main Split Fader..............................................................1011
Setting the Macro Execution Mode...................................................1011
Screen Saver and Other Settings (Maintenance Menu)........................1014
Screen Saver Settings ........................................................................1014
Adjusting the Brightness ...................................................................1014
Adjusting the Alarms.........................................................................1015
Calibrating the Touch Panel ..............................................................1015
Setting the Menu to be Shown When the Menus Are Started...........1016
Setting the Mouse Wheel Scrolling Direction for Parameter Setting1016
Selecting the Mouse Button Used for Adjusting the Knob Parameters
................................................................................................1016
Chapter 20 Switcher Setup (Switcher)
Settings for Switcher Configuration (Config Menu).............................1020
Adjusting the Reference Phase..........................................................1021
Specifying the Video Switching Timing ...........................................1021
Setting the Operation Mode ..............................................................1021
Setting User Regions.........................................................................1024
Assigning PGM/PST Logically to an M/E........................................1025
Setting the Assignments of DME Channels to Use on the Individual M/E
Banks......................................................................................1025
Setting the Side Flag Video Material and Operation ........................1026
Signal Input Settings (Input Menu) ........................................................1028
Making Through Mode Settings........................................................1028
Making Video Process Settings.........................................................1029
Enabling the Illegal Color Limiter ....................................................1029
Selecting the Format Converter Conversion .....................................1030
Signal Output Settings (Output Menu) ..................................................1037
Assigning Output Signals ..................................................................1037
Setting the Output Signal ..................................................................1038
Settings Relating to Video Switching (Transition Menu) .....................1042
Selecting the Bank to Make the Settings...........................................1042
To Next Page
Loading...
