Sony MVS-8000X System - Page 23

23
Table of Contents
Making DCU GPI Input Settings ......................................................1079
Parallel Output Settings (Output Config Menu) ...................................1083
Assigning a GPI Output Port.............................................................1083
Releasing the Assignment of a GPI Output Port...............................1084
GPI Output Setting (GPI Output Assign Menu) ...................................1085
Making DCU GPI Output Settings....................................................1085
Serial Port Settings (Serial Port Assign Menu) .....................................1088
Making Serial Port Settings...............................................................1088
Making Detailed Settings on the External Device Connected to the Serial
Port .........................................................................................1090
Chapter 23 Setup Relating to Router Interface and Tally (Router/Tally)
Router Interface Settings (Router Menu) ..............................................1100
Assigning Switcher Inputs and Outputs to S-Bus Space...................1100
Making an External Box Setting .......................................................1101
Tally Group Settings (Group Tally Menu) ............................................1104
Wiring Settings (Wiring Menu) ..............................................................1105
Making New Wiring Settings............................................................1105
Changing the Wiring Settings ...........................................................1106
Deleting Wiring Settings ...................................................................1106
Sorting Wiring Settings .....................................................................1106
Tally Generation Settings (Tally Enable Menu)....................................1108
Making New Tally Generation Settings............................................1108
Modifying Tally Generation..............................................................1109
Deleting Tally Generation Settings ...................................................1109
Tally Copy Settings (Tally Copy Menu).................................................1111
Making New Tally Copy Settings .....................................................1111
Modifying Tally Copy Settings.........................................................1112
Deleting Tally Copy Settings ............................................................1112
Parallel Tally Settings (Parallel Tally Menu) ........................................1113
Making or Modifying Parallel Tally Settings....................................1113
Deleting Parallel Tally Settings.........................................................1114
Serial Tally Settings (Serial Tally Menu) ...............................................1115
Setting or Changing the Serial Tally Settings ...................................1115
Making the Serial Tally Source Address Settings.............................1115
Clearing a Source Address Setting....................................................1116
Chapter 24 Simple Connection of the MKS-8080/8082 AUX Bus Remote Panel
Procedure for Simple Connection...........................................................1118