Chapter 6 DME Wipes
266
Overview
• Frame in-out V (Frame I/O V): a type of frame in-out mode, which is
specified when creating a transition effect in the vertical direction.
The image movement is reflected at both the transition start point and end
point. (See page 268.)
Transition mode “Compress”
The change in the image when the transition mode is set to “Compress” is as
follows, in comparison to the case of “Picture-in-picture.”
• Example of the image change in the transition mode “Picture-in-
picture” (one-channel mode)
• Example of the image change in the transition mode “Compress”
Transition mode “frame in-out”
In this mode, when the first transition has completed, you can move the image
with the positioner in both horizontal and vertical directions, but the image
position at the transition start point and end point does not change.
The description is of an example of creating an effect such as the following.
Second strokeFirst stroke
First stroke Second stroke
To Next Page
Loading...
