Chapter 7 Frame Memory
309
Still Image Operations
After carrying out the freeze, to return to the state immediately before the
freeze, press [Undo] in the <Freeze> group.
Notes
• All freeze images written to temporary memory are lost when the system
is powered off.
• If you change the frame memory to use as in step 2 before saving the
freeze images written to temporary memory, all the freeze images in
temporary memory are lost, unless the auto store function has been
enabled in setup. With the auto store function enabled, the freeze images
written to temporary memory are saved automatically when the frame
memory selection is changed.
• For the following signal formats, a field freeze is not possible.
1080P/50, 1080P/59.94, 1080PsF/23.976, 1080PsF/24, 1080PsF/
25, 1080PsF/29.97, 720P/50, 720P/59.94
Saving a freeze image (Store)
You can save an image in temporary memory which has been placed with the
freeze function as a file in memory. You can save a single image in a single file
and apply a name of up to eight characters to the file.
Notes
• When the system is powered off, all the files saved in memory are lost.
• When the signal format is 1080P, the file name is limited to seven characters.
Each time a still image is saved, the remaining space is reduced by two
frames.
To save a captured still image in a file, use the following procedure in the Still
>Freeze/Store menu.
1
Press [Store].
The keyboard window (see page 98) appears.
2
In the keyboard window, enter the file name.
Notes
The following names cannot be used:
CON, PRN, AUX, CLOCK$, NUL, COM0, COM1, COM2,
COM3, COM4, COM5, COM6, COM7, COM8, COM9
LPT0, LPT1, LPT2, LPT3, LPT4, LPT5, LPT6, LPT7, LPT8,
LPT9
3
In the keyboard window, press the [Enter] button.
To Next Page
Loading...
