Sony MVS-8000X System - Page 518

Chapter 11 DME Operations
518
DME Special Effect Operations
Rainbow Gradation: Color 3 (see “Color 3 settings” (page 521))
overwrites Radial Rainbow, giving a gradation effect.
2 When you select other than [Flat Color], set the gradation border lines for
the selected pattern.
Border line parameters for Gradation Matte and Rainbow Matte
The valid ranges of the parameter values depend on the combination of
signal format (SD/HD) and aspect ratio (4:3/16:9) selected in the system,
as follows.
•4:3 mode
• 16:9 mode
Flat Color Gradation Matte Rainbow Matte
Radial Gradation Radial Rainbow Rainbow Gradation
Knob Parameter Adjustment Setting values
1 H Position of gradation border in
horizontal direction
–8.00 to +8.00 (SD)
–24.00 to +24.00 (HD)
2 V Position of gradation border in
vertical direction
–6.00 to +6.00 (SD)
–18.00 to +18.00 (HD)
3 Soft Softness of gradation border
region
0.00 to 100.00
Knob Parameter Adjustment Setting values
1 H Position of gradation border in
horizontal direction
–8.00 to +8.00 (SD)
–32.00 to +32.00 (HD)
2 V Position of gradation border in
vertical direction
–4.50 to +4.50 (SD)
–18.00 to +18.00 (HD)
3 Soft Softness of gradation border
region
0.00 to 100.00