Chapter 11 DME Operations
572
DME Special Effect Operations
a) Setting for SD 4:3, SD 16:9
b) Setting for HD 4:3, HD 16:9
To reflect the kaleidoscope image as if in a mirror
1
To reflect in the horizontal direction, press [Mirror H], turning it on.
2
To reflect in the vertical direction, press [Mirror V], turning it on.
To set the reflection position
1
Press [Position], turning it on.
2
Set the following parameters.
a) Setting for SD 4:3, SD 16:9
b) Setting for HD 4:3, HD 16:9
To cyclically repeat part of the original and its reflection
Press [Cyclic], turning it on.
Lens settings
You can set the shape and aspect ratio of the lens, the angle, the magnification
ratio, the curve ratio, the size, the center position, and other parameters.
You can also choose to display only the portion of the image that is seen
through the lens.
To apply the Lens effect
With the Lens menu displayed, use the following procedure.
1
In the <Mode> group, select the lens shape.
•Circle
• Rectangle
•Star
4 Offset V Amount of vertical offset
–3.000 to +3.000
a)
–12.000 to +12.000
b)
Knob Parameter Adjustment Setting values
Knob Parameter Adjustment Setting values
1 H Horizontal reflection position
0.000 to 4.000
a)
0.000 to 16.000
b)
2 V Vertical reflection position
0.000 to 3.000
a)
0.000 to 12.000
b)
To Next Page
Loading...
