Sony MVS-8000X System - Page 583

Chapter 11 DME Operations
583
DME Special Effect Operations
4 In the <Corner Select> group, select the corner to operate on.
Top Left: Top left
Top Right: Top right
Bottom Left: Bottom left
Bottom Right: Bottom right
All: All four corners
5 Turn the knobs to adjust the position of the corner selected in step 4.
The parameter setting ranges depend on the system’s selected signal
format (SD/HD) and aspect ratio (4:3/16:9) combination, as follows.
• 4:3 mode
a) When the selection for operation is “All,” the Top Left value appears, and the knobs move
all four corners correspondingly.
• 16:9 mode
Marker for selected corner
Other markers
Knob Parameter Adjustment Setting values
1 Pos X Movement in x-axis direction –8.00 to +8.00
(SD)
a)
–24.00 to +24.00
(HD)
a)
2 Pos Y Movement in y-axis direction –6.00 to +6.00
(SD)
a)
–18.00 to +18.00
(HD)
a)
Knob Parameter Adjustment Setting values
1 Pos X Movement in x-axis direction –8.00 to +8.00
(SD)
a)
–32.00 to +32.00
(HD)
a)
2 Pos Y Movement in y-axis direction –4.50 to +4.50
(SD)
a)
–18.00 to +18.00
(HD)
a)