Chapter 11 DME Operations
618
DME Special Effect Operations
a) 100.00: The image beneath the light shines through.
• When you selected Hue Rotation
a) –12.00 is a 360-degree rotation every second in the counterclockwise direction. +12.00 is
a 360-degree rotation every second in the clockwise direction.
b) 100.00: The image beneath the light shines through.
Copying or swapping light source settings
You can copy or swap the setting from one light source (Light 1 to Light 3) to
another light source.
1
In the Spot Lighting menu, press [Copy/Swap].
The Copy/Swap menu appears.
Two lists appear in the status area. The list on the left shows the copy or
swap sources, and the list on the right shows the copy or swap destinations.
2
Do one of the following to select the target data.
• Press directly on the list in the status area.
• Press the arrow keys to scroll the reverse video cursor.
• Turn the knobs.
3
Press [Copy] to copy, or [Swap] to swap.
The data is copied or swapped.
To undo a copy or swap
Press [Undo]. Settings are returned to their values before the copy or swap.
4 Brilliancy Brilliance of surface struck by light
0.00 to 100.00
a)
Knob Parameter Adjustment Setting values
Knob Parameter Adjustment Setting values
1 Luminance Luminance 0.00 to 100.00
2 Saturation Saturation 0.00 to 100.00
3 Speed Speed at which hue changes
–12.00 to +12.00
a)
4 Brilliancy Brilliance of surface struck by light
0.00 to 100.00
b)
Knob Parameter Adjustment Setting values
1 Left No Copy or swap source data 1 to 3
2 Right No Copy or swap destination data 1 to 3
To Next Page
Loading...
