Chapter 13 Keyframe Effects
730
Executing Effects
Specifying the effect execution direction
To specify the effect execution direction, press the [REV] button, turning it on
(for reverse direction) or off (for normal direction).
To execute the effect so as to alternate the normal and reverse directions, press
the [NORM/REV] button, turning it on.
When the [REV] button is off: The effect is executed in the direction from
the first keyframe to the last keyframe.
When the [REV] button is on: The effect is executed in the direction from the
last keyframe to the first keyframe.
When the [NORM/REV] button is on: Each time the effect is executed, the
direction reverses.
Executing an effect up to the next keyframe
1
Press the [STOP NEXT KF] button, turning it on.
2
Press the [RUN] button.
This executes the effect as far as the next keyframe. When the [REV]
button is lit, it is executed as far as the previous keyframe.
Repeating an effect
1
Press the [EFF LOOP] button, turning it on.
2
Press the [RUN] button.
This executes the effect repeatedly, from the first keyframe to the last
keyframe.
When the [REV] button is lit, the effect is executed in the reverse direction.
3
To stop the repeating effect, press the [EFF LOOP] button, turning it off,
or press the [REWIND] button.
To Next Page
Loading...
