Chapter 16 Macros
825
Menu Macros
• To recall the register only, press [Recall x].
Executing a menu macro
In the Macro >Menu Macro Register >Recall & Run menu, check that you are
not in macro editing mode, then use the following procedure.
1
Using any of the following methods, specify the event from which you
want to execute.
• Press directly on the menu macro register configuration list.
• Press the arrow keys on the right list to scroll the reverse video cursor.
• Turn the knob.
2
Press [Run].
This executes the menu macro from the specified event.
To stop execution of a macro
Press [Stop].
To move to the start of a menu macro event
Press [Rewind].
Recalling a menu macro register from a macro register
Menu macro recall and execution operations can be saved as events in a control
panel macro, and then recalled.
If with the control panel in macro editing mode you execute a menu macro,
then this operation is recorded as an event.
For details of recalling operations, use the following references, depending on
the control panel or menu used.
• Using the numeric keypad control block and the keyframe control block:
page 792
• Using menus: page 807
Executing by assigning a menu macro register to a button in the
menu
1
In the Home >Favorites >Button Edit menu, select a button to register.
2
Press [Menu Macro Set].
Knob Parameter Adjustment Setting values
3 No Select start event 1 and upwards
To Next Page
Loading...
