Chapter 17 Files
854
Operations on Individual Files
E.g.: img111A and img111B (file names must have the underscored parts the
same)
1
In the File menu, select VF5 ‘Frame Mem’ and HF1 ‘Frame Memory.’
The Frame Memory menu appears. The status area shows the device
status, and a list of files present on the device.
2
Press [File Edit].
3
Select the type of data to be displayed.
• To display still image files, press [Still].
• To display clip files, press [Clip].
• To display extended clip files, press [Ext Clip].
• To display all types of file, press [All].
4
Using any of the following methods, select the file you want to rename.
(When you selected [Clip] or [Ext Clip] in step 3, you cannot select
multiple files.)
• Press directly on the list in the status area.
• Press the arrow keys to scroll the reverse video cursor.
• Turn the knobs.
5
Press [Rename].
The keyboard window appears.
6
Depending on the selections of steps 3 and 4, enter a name as follows and
press [Enter].
• When you selected a single file with [Still] or [All]: Enter a name of not
more than eight characters.
• When you selected more than one file with [Still] or [All]: Enter a name
of not more than four characters.
• When you selected a clip file or an extended clip file: Enter a name of
not more than four characters.
The name you have entered is reflected in the status area.
Knob Parameter Adjustment Setting values
1 List L File selection in the left list 1 and upwards
2 List R File selection in the right
list
1 and upwards
3 Num Number to be selected 1 and upwards
To Next Page
Loading...
