Sony MVS-8000X System - Page 911

Chapter 18 System Setup (System)
911
Setting the Signal Format (Format Menu)
a) Output signals converted from 720P format are not synchronized to the switcher input reference
signal.
On the destination device, do not use an external reference signal, but use an operation mode
that can synch to the format converter output signal.
Setting the conversion format
1 Display the System >Format menu.
Switcher
signal format
setting
Format converter signal format setting
FC Input 1-8 FC Input 9-16 FC Output 1-2 FC Output 3-4
480i/59.94 720P/59.94
1080i/59.94
720P/59.94
1080i/59.94
720P/59.94
1080i/59.94
720P/59.94
1080i/59.94
576i/50 720P/50
1080i/50
720P/50
1080i/50
720P/50
1080i/50
720P/50
1080i/50
720P/50 576i/50
1080i/50
576i/50
1080i/50
576i/50
a)
1080i/50
a)
576i/50
a)
1080i/50
a)
720P/59.94 480i/59.94
1080i/59.94
480i/59.94
1080i/59.94
480i/59.94
a)
1080i/59.94
a)
480i/59.94
a)
1080i/59.94
a)
1080i/50 576i/50
720P/50
1080i/50
576i/50
720P/50
1080i/50
576i/50
720P/50
576i/50
720P/50
1080i/59.94 480i/59.94
720P/59.94
1080i/59.94
480i/59.94
720P/59.94
1080i/59.94
480i/59.94
720P/59.94
480i/59.94
720P/59.94
Current settings of format converter