Chapter 19 Control Panel Setup (Panel)
956
Overall Control Panel Settings (Config Menu)
When the independent key transition control block (simple type) is
installed in the main base
Select the keys to be assigned from the following.
• Key1,2 (keys 1 and 2)
1)
• Key3,4 (keys 3 and 4)
1)
• Key5, 6 (keys 5 and 6)
1)
• Key7, 8 (keys 7 and 8)
1)
1) The M/E bank depends on the settings in the M/E Assign menu where the independent key
transition control block is installed.
• DSK1,2 (downstream keys 1 and 2)
• DSK3,4 (downstream keys 3 and 4)
• DSK5, 6 (downstream keys 5 and 6)
• DSK7, 8 (downstream keys 7 and 8)
• N/A (no assignment)
When the independent key transition control block (simple type) is
installed in the extension section
Select the keys to be assigned from the following.
• M/E-1 Key1,2
• M/E-1 Key3,4
• M/E-1 Key5, 6
• M/E-1 Key7, 8
• M/E-2 Key1,2
• M/E-2 Key3,4
• M/E-2 Key3, 4
• M/E-2 Key5, 6
• M/E-2 Key7, 8
• M/E-3 Key1, 2
• M/E-3 Key3, 4
• M/E-3 Key5, 6
• M/E-3 Key7, 8
• M/E-4 Key1, 2
• M/E-4 Key3, 4
• M/E-4 Key5, 6
• M/E-4 Key7, 8
•DSK1, 2
•DSK3, 4
•DSK5, 6
•DSK7, 8
•Key1, 2
1)
•Key3, 4
1)
•Key5, 6
1)
•Key7, 8
1)
1) These keys are the keys of the M/E-1, M/E-2, M/E-3, M/E-4 or PGM/PST bank depending
on the settings of the M/E Assign menu of the interface port for the extension section in which
the independent key transition control block is installed.
• N/A (no assignment)