Subaru Outback - Page 187

SETTINGS
7
Bluetooth
®
SETTINGS
185
No. Information
&RPSDWLELOLW\SUR¿OHRIWKH%OXHWRRWKGHYLFH
Select to reset all setup items.
NOTE
O If 2 Bluetooth devices have been registered with the same
device name, the devices can be distinguished referring to the
device’s address.
O Depending on the type of phone, some information may not be
displayed.
CHANGING A DEVICE NAME
1. Select
Device Name
(Device Name).
2. Enter the name and then select
OK
(OK).
NOTE
O Even if the device name is changed, the name registered in your
Bluetooth device does not change.
SETTING AUDIO DEVICE CONNECTION METHOD
1. Select
Connect Audio Device from
(Connect Audio
Device from).
2. Select the desired connection method.
Ɣ
Vehicle
(Vehicle): Select to connect the audio
system to the audio device.
Ɣ
Device
(Device): Select to connect the audio device
to the audio system.
Ɣ Depending on the audio device, the “Vehicle
(Vehicle)” or “Device (Device)” connection method
may be best. As such, refer to the manual that comes
with the audio device.
Ɣ To reset the connection method, select
Default
(Default).