WHAT TO DO IF
292
XIn other situations
Symptom Likely cause Solution
Page
Cellular
phone
This
system
The Bluetooth connection status is
displayed at the top of the screen
each time the ignition switch is turned
to the “ACC” or “ON” position.
&RQQHFWLRQFRQ¿UPDWLRQGLVSOD\RQ
this system is set to on.
To turn off the display, set connection
FRQ¿UPDWLRQGLVSOD\RQWKLVV\VWHP
to off.
-186
Even though all conceivable
measures have been taken, the
symptom status does not change.
The cellular phone is not close
enough to this system.
Bring the cellular phone closer to this
system.
--
The cellular phone is the most likely
cause of the symptom.
Turn the cellular phone off, remove
and reinstall the battery pack, and
then restart the cellular phone.
*-
Enable the cellular phone’s Bluetooth
connection.
*-
Stop the cellular phone’s security
software and close all applications.
*-
Before using an application installed
on the cellular phone, carefully check
its source and how its operation
might affect this system.
*-
*: For details, refer to the owner’s manual that came with the cellular phone.