SYNAPTICON SOMANET Circulo 7 - Page 1013

Fig. 1: setting the reference value of velocity to 50% of its rated value
Step 3.
Increase k until the measured speed is around 70% of the reference speed. As a suggestion start with k
equal to 0.1, and in each step increase k with a factor of 2.
P P
P
Synapticon Documentation
© 2021 Synapticon GmbH | Daimlerstraße 26 | D-71101 Schönaich Documentation v 4.19.0 | Built 2022-02-01 1013/1031