SYNAPTICON SOMANET Circulo 7 - Page 1014

Fig. 2: increasing k to increase the actual speed
Step 4.
From this step forth, step response of the system should be checked. Increase k step by step to increase the
speed of velocity controller (as a suggestion start with k equal to 0.01 and in each step increase it by a factor
of 2).
P
I
I
Synapticon Documentation
© 2021 Synapticon GmbH | Daimlerstraße 26 | D-71101 Schönaich Documentation v 4.19.0 | Built 2022-02-01 1014/1031