Decision of the design start position
61
Chapter 4
1
2
3
4
5
6
7
8
9
10
11
(c) To move frame to the design start position
Turn the jog dial (low speed) / the jog shuttle (high speed). The frame will move.
(3) To use the Jog remote-controller (some models only)
(a) Switch to the main screen
Press E key plural times to switch to the main screen.
(b) To move frame to the design start position
Tilt the stick. The frame will move.
Stick
Frame travel speed will be changed by
degree of leaning condition of the stick.
To Next Page
Loading...