IV-100
HYDRAULIC UNITS
CYLINDERS
a. Install the backup ring (41).
b. Install the rod packing (40), being careful of
its installation direction.
c. Install the cushion seal (39).
d. Install the spacer (38).
e. Install the stopper (37).
3. Install the dust seal (42).
• In the case of a dust seal with a metal ring
around the outer circumference, use a setting
tool (46) to install it.
4. Install the backup ring (35) and fit the O-ring
(34).
• The cut portions of the backup ring should
overlap correctly.
Retainer
1. Install the cushion seal (18), the spacer (17), and
the stopper (16) on the retainer.
E5D417
18
17
16
To Next Page
Loading...
