RUN NOW Excite +: Technical Service guide - rev. 6.2
Page 7.10
7.2.2.5. CPU Board (D)
Figure 7-17
Carry out the procedure described in paragraph: 7.2.2.1 “Wireless board (A)” and 7.2.2.2 “DVB-T
Tuner Board (B)”.
1. Disconnect the connectors highlighted in the figure.
2. Back off the 8 screws (a) using a medium Phillips screwdriver.
3. Remove the CPU Board (D).
To reassembly the CPU Board,
follows the above steps in the reverse order.