Technogym RUN NOW EXCITE + - Language; Distance; COOLDOWN TIME XXX

RUN NOW Excite +: Technical Service guide - rev. 6.2
Pagina 9.2
9.1.1. LANGUAGE
After selecting a language from the list of those available, all messages subsequently displayed by
the machine will be in the chosen language. To change the selection, when the LED matrix shows
the current setting:
LANGUAGE : xxx
Press the +/- GOAL keys to select the desired language from the options available.
9.1.2. DISTANCE
It is possible to choose between EUROPEAN units (Kg e Km) or IMPERIAL units (lbs e ml).
To change the selection, when the LED matrix shows the current setting:
DISTANCE: xxx
Press the +/- GOAL keys to select the desired unit of measurement from the options listed in the
table below:
DISTANCE
KM <default>
MI
9.1.3. MAXIMUM EXERCISE TIME
It is possible to set a maximum duration for the exercise in minutes, with values ranging from 1 to
9999. To change the setting, when the Display shows:
MAX TIME: xxx
Press the ENTER key to modify the parameter: when the current value of the parameter starts to
blink, press the CLEAR key to erase the current value and then enter one digit at a time using the
↑
and
↓
keys to change the value and the +/- GOAL keys to scroll to the next character.
The default value of this parameter is 9999.
9.1.4. COOLDOWN TIME
It is possible to set the cooldown time for each exercise, ranging from 5 to 180 seconds. To change
the setting, when the display shows the currently selected maximum time:
COOLDOWN TIME xxx
Press the ENTER key to change the value: The current parameter value starts to blink on the
display; use the
↑
and
↓
keys to increase or decrease the value, or use the +/- GOAL keys to scroll
through and modify the individual digits.
The default value of this parameter is 60.
If you are exercising with a TGS key, the cooldown will be stopped if you extract the key.