Technogym RUN NOW EXCITE + - Machine Configuration; 9.1. User Menu: 500 LED Models

RUN NOW Excite +: Technical Service guide - rev. 6.2
Pagina 9.1
9. MACHINE CONFIGURATION
9.1. USER MENU: 500 LED MODELS
The machine configuration procedure is invoked by simultaneously pressing the keys ENTER,
↑
,
CLEAR when the machine is in standby mode. The following prompt appears on the LED display:
ENTER PASSWORD:
To access the procedure, insert the password 2406 and press ENTER to confirm. To enter the
password without the numeric keypad, enter one digit at a time using the
↑
and
↓
keys to change the
value and the +/- GOAL keys to scroll to the next character.
At this point the machine display begins showing the current configuration, structured as in the
diagram below:
USER MENU
Language
MAX time
Distance
Pause time
Default age
Default weight
TGS
Custom mess.
Up/Down
Keys
HR
User detect
Default config.
Default time
SN
Format P&P
Default calories
Default distance
Cooldown Time
Ready to Run
Press ENTER to scroll the parameters saving the settings otherwise press the + or -
SPEED keys to scroll the parameters without saving. Press CLEAR to cancel or keep it
pressed for few seconds to esc.