Technogym RUN NOW EXCITE + - Modifiable Target Heart Rate; Enable Custom Messages; Edit Messages; Change Messagges Languages

RUN NOW Excite +: Technical Service guide - rev. 6.2
Pagina 9.11
9.2.8. MODIFIABLE TARGET HEART RATE
It is possible to enable or disable modification of the target heart rate during a constant heart rate
exercise. To change the selection, when the display shows the current setting:
HR : xxx
Press the +/- GOAL number keys to select the desired option out of those listed in the table below:
HR
MODIFIABLE <default>
NOT MODIFIABLE
9.2.9. ENABLE CUSTOM MESSAGES
It is possible to configure whether a custom message is displayed when the machine is in the
standby state. To change the selection, when the LED matrix shows the current setting:
CUSTOM MESS. : xxx
Press the +/- GOAL number keys to select the desired option out of those listed in the table below:
CUSTOM MESS.
YES <default>
NO
9.2.10. EDIT MESSAGES
It is possible to modify the custom messages; press ENTER to invoke a submenu which displays the
first custom message, then use the +/- speed keys to move to the other messages. Press the ENTER
key again to begin editing a message, or hold down the CLEAR key for a few seconds to return to the
upper menu level. While editing a message, move the cursor using +/- GOAL, select the desired letter
using the +/- speed keys and use CLEAR to enter a blank space character. Press ENTER to save the
modified message, or hold down the CLEAR key to cancel and return to the upper menu level.
9.2.11. CHANGE MESSAGGES LANGUAGES
It is also possible to display the custom standby messages in the language selected with the
preceding parameter. To extend the language setting to the predefined custom standby messages,
when the LED display is showing the current selection:
CHANGE MESS. LANGUAGE