Technogym RUN NOW EXCITE + - Default Time; Default Calories; Default Distance

RUN NOW Excite +: Technical Service guide - rev. 6.2
Pagina 9.4
9.1.8. DEFAULT TIME
It is possible to set the default duration of the exercise in minutes, with values ranging from 10 to
999. To change the setting, when the LED matrix shows the current time:
DEFAULT TIME: MIN. xxx
Press the ENTER key to change the parameter: the current value of the parameter will start to blink,
at this point press the CLEAR key to erase the current value and then enter one digit at a time using
the
↑
and
↓
keys to change the value and the +/- GOAL keys to scroll to the next character.
The default value of this parameter is 15.
9.1.9. DEFAULT CALORIES
It is possible to set the calories for every exercise, with values ranging from 10 to 999. To change
the setting, when the LED matrix shows the current setting:
DEFAULT CALORIES: xxx
Press the ENTER key to change the parameter: the current value of the parameter will start to blink,
at this point press the CLEAR key to erase the current value and then enter one digit at a time using
the
↑
and
↓
keys to change the value and the +/- GOAL keys to scroll to the next character.
The default value of this parameter is 300.
9.1.10. DEFAULT DISTANCE
It is possible to set the distance for every exercise in Km, with values ranging from 1 to 999. To
change the setting, when the LED matrix shows the current setting:
DEFAULT DISTANCE: KM xxx
Press the ENTER key to change the parameter: the current value of the parameter will start to blink,
at this point press the CLEAR key to erase the current value and then enter one digit at a time using
the
↑
and
↓
keys to change the value and the +/- GOAL keys to scroll to the next character.
The default value of this parameter is 10.