RUN NOW Excite +: Technical Service guide - rev. 6.2
Pagina 9.8
9.2. USER MENU: 700 - 900 LED MODELS
The machine configuration procedure is invoked, when the machine is in standby mode, by
simultaneously pressing the keys 369, whereas on 700 Wellness TV models the keys 0369 must be
pressed one after the other. The following prompt appears on the display:
ENTER PASSWORD:
To access the procedure, type in the password 2406 and press ENTER to confirm. At this point the
machine display begins showing the current configuration, structured as in the diagram below:
USER CONFIG Language
MAX time
Distance
Pause time
TGS
Keys
Custom Mess.
Language
Change Mess.Lang.
Edit Mess.
Default config.
Format P&P
User detect
Up/Down
HR
SN
Cooldown time
Ready to Run
To Next Page
Loading...
